Checking Properties In Detail; Displaying Group Properties; Displaying Projector Properties; Displaying And Deleting Logs - Epson EasyMP Monitor Operation Manual

Monitoring window layout

Checking properties in detail

You can check the properties of Group and projectors in detail.

Displaying Group properties

Procedure
You can use either of the following methods to display the
properties.
• Displaying the properties for all groups in Grouping view
Right-click in Grouping view and select Property.
• Displaying the specified group properties
Right-click an icon in Grouping view and then select Property.
If you double-click in a line, the properties for that group or projector
will be displayed.

Displaying Projector properties

Right-click on a projector icon in Grouping view or Detail list view and
select Property.
A
Shows the projector's serial number. If hyphens are displayed, confirm the
serial number on the label of the projector.
B
Displays the projector firmware version.

Displaying and deleting logs

In your web browser, you can check a transmission log of content such
as what has been controlled by EasyMP Monitor, projector errors. You
can delete logs once you have checked them.
When Log output is set to On at Environment setup in the Tool
q
menu, transmission logs are stored. The default setting is Off.
27