Epson EasyMP Monitor Operation Manual page 36

An e-mail notifying the operator of a problem/warning/status is issued
Message
Network error (TCP Check that the projector's power is turned on and
connection error) the LAN cable is connected, and also check that
Network Monitoring is set to On and Standby
Mode is set to Network On. s Projector's User's
Guide
Network error (ESC/ Check that the projector has been correctly
VP.net communication connected to the network. s Projector's User's Guide
error)
Network error (Moni- Check the projector's Monitor Password.
tor Password authenti-
cation error)
When the projector has 2 lamps, the additional information, such as
*
(Lamp 1) or (Ballast 1), is displayed after the message so that you can
know witch lamp has problems/warnings.
Messages to inform that the projector has recovered from the error or
warning statuses are sent.
Remedy
36