Checking Properties In Detail - Epson EMP Operation Manual

Monitoring window layout
Power off and normal status
Lamp Hours: Shows the lamp operating time for the projector.
Source: Shows the input source that has been selected for the projector.
Computer or Computer1
Computer2
BNC
S-Video
Video(RCA)
Video(BNC)
Temperature level: The following five icons display the differing internal
temperature status of the projector.
Internal temperature normal
Internal temperature normal
High-temperature warning
Error information: Shows the warning or problem status using the following
icons.
*
Replace Lamp
High-temperature warning
Replace Air Filter
Power off and abnormal status
DVI or HDMI (Digital)
D-Video
EasyMP
USB Display
USB
LAN
High-temperature warning
Internal temperature error
Lamp Error
Lamp failure at power on
High internal temperature error
No Air Filter
Low Air Flow
Air Flow Sensor Err.
Low air flow error
Air filter air flow sensor error
Lamp Cover Open
* You can display Replace lamp at any time preset at Environment setup in
the Tool menu.
Detectable error information differs with the projector you are using.
q

Checking properties in detail

You can check the properties of groups and projectors in detail.
25
Internal Error
Fan error
Sensor error
Supply System Error (Ballast)
Auto Iris Error
Other error