Procedures For New Timer Settings - Epson EasyMP Monitor Operation Manual

Using the control functions
The details that can be checked and operations that can be carried out
at this time are given below.
A
Projectors
Selects a group or projector to check the status of.
When a group is selected, the timer setting statuses for all projectors in that
group are displayed.
B
Date
Shows the current day in a red box.
Days for which timer settings have been made are shown in bold.
Click or to switch to the calendar for the previous or next month.
C
Timers
Shows a list of the timer settings.
The line colors in the Timers list have the following meanings:
Current day's timer setting
When some of the projectors in the group have timer setting ena-
bled and others have it disabled for the current day's timer setting
When the current day's timer setting is a disabled setting
Timer setting for a day other than the current day
D
Delete
Lets you delete timer settings that have been selected from the tim-
er list.
E
Close
Closes the Timer Settings window.
F
Edit
Lets you change the timer settings that have been selected from
the timer list. If a group has been selected for status checking, the
settings cannot be changed.
G
Add
Registers new timer settings. s "Procedures for new timer set-
tings" p.31
H
Enabled/disabled
Switches the timer settings that have been selected from the tim-
er list between enabled and disabled.

Procedures for new timer settings

Procedure
A
Click "Add" on the Timer Settings window. The following
window is displayed and the new timer settings are applied.
31