Epson EasyMP Monitor Operation Manual page 26

Monitoring window layout
USB2
F
Temperature level
The following five icons display the differing internal temperature status
of the projector.
Internal temperature
normal
High-temperature
warning
Internal temperature
error
G
Error information
Shows a warning/problem status using the following icons.
*6
Replace Lamp
Replace Lamp (Lamp 2)
Lamp error (Lamp 2)
Lamp failure at power on
(Lamp 2)
Replace Air Filter
Low Air Flow
Supply System Error (Ballast
1)
Cinema filter warning
Lamp Cover Open
Lamp Error (Lamp 1)
Lamp failure at power on
LAN
Internal temperature
normal
High-temperature
warning
Replace Lamp (Lamp 1)
Lamp error (Lamp 1)
Lamp failure at power on
(Lamp 1)
High-temperature warning
No Air Filter
Air Flow Sensor Err.
Supply System Error (Ballast
2)
Shutter warning
Lamp Error
Lamp Error (Lamp 2)
Lamp failure at power on
(Lamp 1)
Lamp failure at power on
(Lamp 2)
Low air flow error
Internal Error
Sensor error
Supply System Error (Ballast
1)
Auto Iris Error
Shutter error
Cooling system error (pump)
*1 When Temperature level display group view is set to On at Environment
setup in the Tool menu, an icon indicating the internal temperature of the
projector will be displayed on top of the projector icon. The default
setting is Off.
*2 Check the following items.
- Check that the projector's power is turned on.
- Check that the LAN cable is connected.
- Check that Network Monitoring is set to On or Standby Mode is set to
Network On in the projector's configuration menu.
*3 Check that the projector has been correctly connected to the network.
*4 It describes DVI-D if the projector is equipped with both DVI-D and
HDMI input terminal.
*5 It describes HDMI if the projector is equipped with both DVI-D and
HDMI input terminal.
*6 You can display Replace Lamp at any time preset at Environment setup in
the Tool menu.
Detectable error information differs with the projector you are using.
q
26
High internal temperature er-
ror
Air filter air flow sensor error
Fan error
Supply System Error (Ballast)
Supply System Error (Ballast
2)
Cinema filter error
Cooling system error (Peltier
element)
Other error