Registration By Specifying An Ip Address (Manual Registration) - Epson EasyMP Monitor Operation Manual

Registering and deleting projectors for monitoring
C
To end the registration operation, click
corner of the window or click "Cancel".
The icon(s) of the projector(s) you registered will be displayed in
Grouping view or Detail list view.
Refer to "Monitoring window layout"
s
using the Grouping view and Detail list view.
Registration by specifying an IP address (Manual
registration)
Procedure
A
Right-click in Grouping view and select "New" - "Projector
(manual registration)".
The following window will be displayed.
If Detail list view is displayed, select New - Projector (manual
registration) from the Edit menu.
in the top-right
p.19 for details on
You can also carry out this operation by selecting New -
q
Projector (manual registration) from the Edit menu.
B
Enter the IP address of the projector to be registered in the
"IP address" box and then click "Search". When the message
is displayed, click "OK".
If using a serial TCP/IP conversion adapter and cable to
W
connect the projector, select Use Serial
adaptor., enter the port number in Port Number, and then click
Search.
15
TCP/IP conversion
W