Power Outlet; Using An Ac Adaptor; Using Batteries - Casio Aculaser M2 User Manual

Power Outlet

Your Digital Piano runs on standard household power.
Be sure to turn off power whenever you are not using
the Digital Piano.

Using an AC Adaptor

Use only the AC adaptor (JEITA Standard, with unified
polarity plug) that comes with this Digital Piano. Use
of a different type of AC adaptor can cause
malfunction of the Digital Piano.
Specified AC Adaptor: AD-A12150LW
• Use the supplied power cord to connect the AC
adaptor as shown in the illustration below.
DC 12V terminal
Note the following important precautions to avoid
damage to the power cord.
■ During Use
• Never pull on the cord with excessive force.
• Never repeatedly pull on the cord.
• Never twist the cord at the base of the plug or
connector.
■ During Movement
• Before moving the Digital Piano, be sure to unplug
the AC adaptor from the power outlet.
■ During Storage
• Loop and bundle the power cord, but never wind it
around the AC adaptor.
IMPORTANT!
• Never connect the AC adaptor (JEITA Standard,
with unified polarity plug) that comes with this Digital
Piano to any other device besides this Digital Piano.
Doing so creates the risk of malfunction.
• Make sure the Digital Piano is turned off before
plugging in or unplugging the AC adaptor.
• The AC adaptor will become warm to the touch after
very long use. This is normal and does not indicate
malfunction.
Household power outlet
Power cord
AC adaptor
• Configuration and type depends
on your geographic location.

Using Batteries

You can use eight AA-size batteries for power.
• Use alkaline batteries.
Never use oxyride or any other nickel based
batteries.
1.
On the back of the Digital Piano on the right,
loosen the two screws that secure the battery
cover in place.
• The screws are designed so they can be loosened
only, and not come completely out.
2.
Slide the battery cover away from you to
remove it.
3.
Load eight AA-size batteries into the battery
compartment.
• Make sure the positive + and negative - ends of the
batteries are facing as shown in the illustration.
4.
Replace the battery cover and slide it towards
you (the reverse of what you did in step 2) to
close it.
• Make sure that the tabs of the battery cover engage
with the tabs of the Digital Piano.
5.
Secure the battery cover by tightening the
two screws you loosened in step 1.
Screws
Battery cover
Tabs
E-5