Operations Common To All Modes; Changing A Number Or A Value - Casio Aculaser M2 User Manual

Operations Common to All Modes

cm
The operations described in this section are common to
all modes and functions.

Changing a Number or a Value

Use the operations in this section to specify a number
or to change a value.
Example: To change a tone number
After using buttons bo through
specify a group, use one of the methods below to
change the selected tone number. (For details about
selecting tones, see "Using Built-in Tones" on page
E-14.)
To scroll a number sequentially
1.
Press the eo minus (–) or plus (+) button.
To fast scroll a number
1.
eo
Hold down the minus (–) or plus (+) button.
To jump in steps of 10
1.
While holding down the
the eo minus (–) or plus (+) button.
cq cr cs
cl (Tone Group) to
en
(NUM KEY), press
dl
dr
To input a number with the 10-key pad
1.
en
Press the (NUM KEY) button.
This will cause the button's lamp to light, indicating the
number input mode.
2.
dm
Use buttons (0) through
ds em
(5) through (9) to input the number you
want.
To return a number to its initial default
setting
• The initial default of a number depends on the
parameter being set.
1.
eo
Press the minus (–) and plus (+) buttons at
the same time.
NOTE
• You can also input numbers and characters using the
Digital Piano's knobs. For more information, see the
separate "Tutorial".
dm dn do dp dq en eo
ds dt ek el em ep eq er
dq
(4) and buttons
E-9