Using The Editing Function; Meanings Of Symbols Next To Numbers - Casio Aculaser M2 User Manual

Using the Editing Function

Use the procedure below with functions that allow
editing of tones and data. Editing lets you change the
parameters of each editable item.
1.
ep
Press the (EDIT) button.
This displays the editing screen.
2.
Use the ds (u), dt
(i) buttons to select the item you want to
edit.
• If ">ENT" is on the display, it means that there are
more items that can be edited in the operation you are
performing. In this case, pressing the
button will advance to the next editing page.
3.
Change parameters as desired.
• For details about how to change parameters, see
"Changing a Number or a Value" in "Operations
Common to All Modes" (page E-9).
4.
After you finish with your edits, use the
(EXIT) button to exit the editing screen.
• Press the dr (EXIT) button the required number of
times to navigate back to the screen that was
displayed when you started editing.
Meanings of Symbols Next to
Numbers
The meanings of the symbols next to numbers after you
record or edit data are explained below.
! : Unsaved data
* : Saved data
• Unsaved data (!) will be discarded if you exit the
editing or recording operation by selecting a
different number. Don't forget to save data that you
want to retain. See "Saving Data" in "Operations
Common to All Modes" (page E-11) for more
information.
(w), ek (q), and el
em
(ENTER)
dr
Operations Common to All Modes
E-13