Wpa Key Settings - ZyXEL Communications NWD-271N User Manual

Table 6 WEP Key Settinhs
TAB
Change/Apply
OK

4.3.2 WPA Key Settings

This screen allows you to configure WPA encryption for a profile. Click the
Settings > WPA Encryption button to open it.
Note: For more information on wireless LAN security, see
Figure 8 The Settings Screen
The following table describes this screen.
Table 7 WEP Key Settinhs
TAB
WPA Pre Shared
Key
OK
NWD-271N User's Guide
DESCRIPTION
Click this button when it reads Change to unlock the settings for
editing. Click it when it reads Apply in order to store these encryption
settings with the profile.
Click this button to close this screen. It does not save any changes
made; to do that, you must click the Apply button.
DESCRIPTION
Enter the WPA pre shared key for the network associated with this
profile. You can enter 8-63 alphanumeric characters (a-z, A-Z, 1-9).
This applies to both WPA-PSK and WPA2-PSK.
Click this button to close this screen and save your changes.
Chapter 4 ZyXEL Utility
Section 2.3 on page 19.
29