ZyXEL Communications NWD-271N User Manual page 27

The following table describes this screen.
Table 5 Settings Screen
TAB
Basic Settings
SSID
Network Type
Encryptions
Authentication
Change/Apply
Encryption Setting Use these buttons to configure your encryption settings for the
WEP
Encryption
WPA
Encryption
Profile
Profile name
Load
Save
Delete
Other
Information
OK
NWD-271N User's Guide
DESCRIPTION
These describe the basic profile settings currently in use.
This is the SSID of the current profile. This name can be up to 32
alphanumeric characters in length (a-z, A-Z, 0-9).
This is the network type of the current profile. It can be either
Infrastructure or Ad-Hoc.
This is the encryption type of the current profile.
This is the authentication type of the current profile.
Click Change to make these fields editable. The button label
becomes Apply, which you can then click to create a new profile.
The SSID name is used as the Profile Name.
The profile is not saved until you click the Save button (below).
profile.
Click this to open the WEP Key Setting dialog box.
For details on this screen, see
Click this to open the WPA Key Setting dialog box.
For details on this screen, see
This section allows you to manage your profile.
Enter a profile name using up to 256 characters and spaces (a-z, A-
Z, 0-9). Only the first 35 characters of the name appear in the drop
down list, however.
Select a profile from the Profile name list and then click Load to
use its settings.
Click this button to save a profile.
Select a profile from the Profile name list and then click Delete to
remove it..
This section displays additional information about your NWD-271N.
Click this button to display driver and utility information.
Click this button to close this screen.
Chapter 4 ZyXEL Utility
Section 4.3.1 on page 28.
Section 4.3.2 on page 29.
27