Accessing The Zyxel Utility; Link Quality - ZyXEL Communications NWD-271N User Manual

Chapter 5 Troubleshooting
If the problem continues, contact the vendor.
4

5.3 Accessing the ZyXEL Utility

I cannot access the ZyXEL Utility
Make sure the NWD-271N is properly inserted and the LEDs are on.
1
Install the NWD-271N on another computer.
2
If the error persists, you may have a hardware problem. In this case, you should
3
contact your vendor.

5.4 Link Quality

The link quality and/or signal strength is poor.
Scan for and connect to another AP with a better link quality.
1
Move your computer closer to the AP or the peer computer(s) within the
2
transmission range.
There may be too much radio interference (for example from a microwave oven,
3
or another AP using the same channel) around your wireless network. Lower the
output power of each AP.
Make sure there are not too many wireless stations connected to a wireless
4
network.
32
NWD-271N User's Guide