Wpa/Wpa2; Figure 14 Security Settings: Wpa/Wpa2; Table 7 Security Settings: Wpa/Wpa2 - ZyXEL Communications ZyXEL ZyAIR G-260 User Manual

ZyXEL G-260 User's Guide

3.2.2.2 WPA/WPA2

Figure 14 Security Settings: WPA/WPA2

The following table describes the labels in this screen.

Table 7 Security Settings: WPA/WPA2

LABEL
Authentication
Type
Login Name
Certificate
Password
Validate Server
Certificate
PEAP Inner EAP
Back
Next
Exit
39
DESCRIPTION
Select an authentication method from the drop down list. Options are TLS and
PEAP.
Enter a user name.
This is the user name that you or an administrator set up on a WPA/WPA2 server.
This field is only available when you select TLS in the Authentication Type field.
Specify the location and name of a certificate in the Certificate field or click
Browse to locate it.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
Select the check box to check the certificate of the authentication server.
This field is only available when you select PEAP in the Authentication Type
field.
Use the drop-down list box to select a PEAP protocol. Options are MD5
CHALLENGE, TOKEN CARD and MS CHAP v2.
Click to go back to the Encryption Type screen.
Click Next to confirm your selections and go to the Save screen.
page 41
Click Exit to discard changes and return to the Site Survey screen.
Section 3.2.3 on
Chapter 3 ZyXEL Utility Configuration