When installing:
• Do not press the top of the thermal module cover and the thermal module hub.
• Before you attach the thermal module to the computer, apply thermal grease, at an amount of 0.2 grams,
on the part marked
a
grease can cause a thermal problem due to imperfect contact with a component. You need to peel the
thin film off from the rubbers marked
For models with discrete thermal pipes
For models with integrated thermal pipes
1120 Keyboard
For access, remove these FRUs in order:
•
"1020 Battery pack" on page 65
as shown in the following illustrations. Either too much or too less application of
b
.
.
Chapter 9
Removing or replacing a FRU
77