Removal steps of the dc-in/Ethenet card support bracket
1
Remove the screws
and remove the dc-in/Ethenet card support bracket
Note: The system board of the computer that you are servicing might be different from the one in the
following illustration.
Step
Screw (quantity)
1
M2.5 × 5 mm, wafer-head, nylon-coated (1)
1
M2 × 3 mm, wafer-head, nylon-coated (1)
1180 Speaker assembly
For access, remove these FRUs in order:
•
"1020 Battery pack" on page 65
•
"1030 Large bottom cover" on page 66
•
"1040 Small bottom cover" on page 67
•
"1050 Optical drive or optical-drive bay bezel" on page 68
• "1070 Hard disk drive with bracket or solid-state drive with bracket" on page 69
•
"1080 Wireless-WAN card or M.2 solid-state drive" on page 71
•
"1090 Wireless-LAN/Bluetooth card" on page 73
•
"1100 Coin-cell battery" on page 74
•
"1110 Thermal module" on page 75
•
"1120 Keyboard" on page 77
•
"1130 Keyboard bezel assembly" on page 83
•
"1150 System board" on page 87
•
"1160 Media-card-reader/USB card" on page 90
94
Hardware Maintenance Manual
2
.
Color
Torque
Black
0.294 Nm
(3 kgf-cm)
0.181 Nm
Silver
(1.85 kgf-cm)