Chapter 2. Important Service Information; Strategy For Replacing Frus; Strategy For Replacing A Hard Disk Drive Or A - ThinkPad Edge E440 Hardware Maintenance Manual

Chapter 2. Important service information

This chapter presents the following important service information that applies to the MT supported by
this manual:
• "Strategy for replacing FRUs" on page 23
– "Strategy for replacing a hard disk drive or a solid-state drive" on page 24
– "Important notice for replacing a system board" on page 24
– "How to use error codes" on page 24
• "Strategy for replacing FRUs for CTO, special bid model, and standard model" on page 24
– "Product definition" on page 24
– "FRU identification" on page 25
Important:
• If the computer is equipped with both a hard disk drive and an M.2 solid-state drive, do not use the M.2
solid-state drive as a bootable device. The M.2 solid-state drive is designed and developed for "cache"
function purpose only.
• Advise customers to contact the Lenovo
obtaining or installing any software fixes, drivers, and Unified Extensible Firmware Interface (UEFI) basic
input/output system (BIOS) downloads. Telephone numbers for Lenovo Support are available at:
http://www.lenovo.com/support/phone
• System disassembly and reassembly videos that show the Field Replaceable Unit (FRU) removal or
replacement procedures for the Lenovo authorized service technicians are available at:
http://www.lenovoservicetraining.com/ion/

Strategy for replacing FRUs

Before replacing parts:
Ensure that all software fixes, drivers, and UEFI BIOS downloads are installed before you replace any
FRUs listed in this manual.
After a system board is replaced, ensure that the latest UEFI BIOS is loaded to the system board before you
complete the service action.
To download and install software fixes, drivers, and UEFI BIOS, go to http://www.lenovo.com/ThinkPadDrivers
and follow the instructions on the screen.
Use the following strategy to prevent unnecessary expense for replacing and servicing FRUs:
• If you are instructed to replace a FRU but the replacement does not correct the problem, reinstall the
original FRU before you continue.
• Some computers have both a processor board and a system board. If you are instructed to replace either
the processor board or the system board, and replacing one of them does not correct the problem,
reinstall that board, and then replace the other one.
• If an adapter or a device consists of more than one FRU, any of the FRUs might be the cause of the error.
Before replacing the adapter or device, remove the FRUs, one by one, to see if the symptoms change.
Replace only the FRU that changed the symptoms.
© Copyright Lenovo 2013
®
Customer Support Center if they need any assistance in
23