Operation With The Internal Battery - Xantrex XPower PowerSource Mobile 100 Manual

Operation with the Internal Battery

When not connected to DC power, the PowerSource
Mobile 100 uses its internal battery to operate or
charge devices that consume 65 W or less.
To power devices from the internal battery:
1. Press the
status LED glows blue, indicating the unit is ready.
2. Plug the product(s) you want to operate into the
PowerSource Mobile 100 AC outlet or USB ports
and turn them on (if necessary).
The total power consumption of the products
must be less than 65 W.
3. When not in use, press the
the unit off.
When the internal battery has discharged to 9.5 V, the
status LED flashes and the alarm beeps once every
two seconds, indicating that the battery needs to be
recharged. See "Recharging the PowerSource Mobile
100" on page 22.
18
/ button to turn the unit on. The
ON OFF
/ button to turn
ON OFF