Installing The Options; Memory Module - Epson EPL-N2050+ Setup Manual

3

Installing the Options

You can install the memory module, ROM module, Hard Disk
Drive, Interface Card, Duplex Unit, Multibin Unit, Shifter, and
Envelope Feeder into the printer. See the installation instructions
for the option you want to install. After installing options, print a
status sheet to confirm that they are installed correctly.

Memory Module

By installing a memory module, you can increase printer memory
up to 256 MB. You may want to add memory if you are having
difficulty printing complex, graphics-intensive pages, using the
Duplex Unit, or if you regularly use numerous downloaded fonts.
You can purchase memory modules from various vendors. Be
sure the memory module you purchase meets the following
requirements.
DRAM type
Memory size
Type
Access speed
Height
Note:
If you install an optional memory module, Installed Memory on the
status sheet shows the total size including both default 16 MB and the
optional module's size. However, if you install one 256 MB-DIMM, the
status sheet shows just 256 MB because the maximum memory size for
this printer is 256 MB.
14
Installing the Options
Synchronous Dynamic RAM Double In-line
Memory Module (SD RAM DIMM)
16 MB, 32 MB, 64 MB, 128 MB, or 256 MB
168-pin type, 64 bit, with SPD
66.66 MHz or higher (15 ns or less)
Less than 40 mm