Testing the Printer
To test whether the printer is set up correctly, print a status sheet.
The status sheet contains information about the printer and the
installed options, including the current settings. To print a status
sheet, follow the steps below.
Loading paper
1. Open the MP tray if it is not open. Pull out the extension tray
if necessary.
2. Fan a stack of paper and tap it on a flat surface to even the
edges. With the printable surface down, load the stack of
paper by inserting it all the way into the tray. Then, slide the
paper guides against the sides of the paper.
Testing and Connecting the Printer
37