Fujitsu M2010 Operating Manual page 51

► Remove the "Torx 6" M2 x 2.5 mm screws (1).
Keep the screws in a safe place. If you are removing more than one component at
the same time, store the screws for the individual components separate from each
other. If you install the wrong screws, components may be damaged.
► Using the pulling aid, carefully pull the hard disk from the hard disk compartment (2).
► Undo the M3 x 3.5 mm screws (1) to release the metal plate and the pulling aid from the hard disk.
A26391-K245-Z220-1-7619, edition 1
Removing and installing components during servicing
1
1
1
2
41