Password Protection For Booting Of The Operating System - Fujitsu M2010 Operating Manual

Security functions

Password protection for booting of the operating system

With the supervisor password you have set in the BIOS Setup Utility (see
section
prevent booting of the operating system.
Operating system
Activating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the Password on Boot option and press the Enter key.
► Select Enabled and press the Enter key.
► Select the Save Changes & Exit option under Exit.
The notebook will reboot. You will be prompted to enter your password (the supervisor password).
Deactivating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the Password on Boot option and press the Enter key.
► Select the Disabled option and press the Enter key.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
► Select the Save Changes & Exit option under Exit.
The notebook will reboot. The system is no longer password-protected.
32
"Setting supervisor and user password", Page 31), you can also
A26391-K245-Z220-1-7619, edition 1