Download Print this page

Advertisement

Fujitsu M Series
Mini-Notebook
BIOS Guide
M Series Model:
M2010
Document Date: 06/18/2009
Document Part Number: FPC58-2066-01
F U J I T S U C O M P U T E R S Y S T E M S C O R P O R AT I O N
1

Advertisement

   Related Manuals for Fujitsu M2010 - Mini-Notebook - Atom 1.6 GHz

   Summary of Contents for Fujitsu M2010 - Mini-Notebook - Atom 1.6 GHz

  • Page 1

    Fujitsu M Series Mini-Notebook BIOS Guide M Series Model: M2010 Document Date: 06/18/2009 Document Part Number: FPC58-2066-01 F U J I T S U C O M P U T E R S Y S T E M S C O R P O R AT I O N...

  • Page 2: Bios Setup Utility

    1. Turn on or restart your notebook. Change or System Failure 2. Press [F2] once the Fujitsu logo appears on the screen. This will open the main menu of the BIOS If there has been a change in the system configuration Setup Utility with the current settings displayed.

  • Page 3

    I n f o M e n u 3. If an error message is displayed on the screen, and you want to enter the setup utility, press the [F2] key. 4. When the setup utility starts with a fault present, the system displays the following message: Warning! Error message...

  • Page 4

    M S e r i e s M i n i - N o t e b o o k B I O S INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION The Info Menu is a display only screen that provides the those fields.

  • Page 5

    Advanced Security Boot Exit Item Specific Help System Time: [XX:XX:XX] System Date: [XX/XX/2008] Adjust calendar clock. <Tab>, <Shift-Tab>, or Drive0 [FUJITSU MHZ2160BH G2-(S1)]] <Enter> selects field. Help Select Item -/Space Change Values Setup Defaults Exit Select Menu Enter Select Sub-Menu Save and Exit Figure 2.

  • Page 6

    M S e r i e s M i n i - N o t e b o o k B I O S Table 2: Fields, Options and Defaults for the System Menu Note that the parameters listed in the following table may vary depending upon your system’s configuration. Menu Field Options Default...

  • Page 7

    S y s t e m M e n u Drive0 Submenu of the System Menu The Drive0 submenu identifies what ATA devices are installed. Phoenix TrustedCore(tm) Setup Utility System Item Specific Help Drive 0: [FUJITSU MHZ2160BH G2-(S1)] Drive0: [Enabled] [Disabled] The drive is disabled. Type:...

  • Page 8

    M S e r i e s M i n i - N o t e b o o k B I O S ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to: The following tables show the names of the menu fields for the Advanced Menu, all of the options for each field, Enable legacy USB emulation.

  • Page 9

    Remember your passwords! If you set and forget your User and Master hard disk passwords, Fujitsu Computer Systems will not be able to reset it. You may lose data and have to replace your system board or hard disk drive.

  • Page 10

    M S e r i e s M i n i - N o t e b o o k B I O S Table 5: Fields, Options and Defaults for the Security Menu Menu Field Options Default Description Supervisor –—...

  • Page 11

    Boot Device Priority Item Specific Help Boot priority order: Keys used to view or Floppy Disk Drive configure devices: Drive0 HDD: FUJITSU MHZ2160BH G2-(S1) CD/DVD Drive <+>/<Space> or <-> NETWORK: Realtek LAN moves the device up or down. <x> exclude or include the device to boot.

  • Page 12

    M S e r i e s M i n i - N o t e b o o k B I O S Exiting from Boot Menu When you have finished setting the boot parameters with the Boot Menu, you can either exit from the setup utility or move to another menu.

  • Page 13

    E x i t M e n u EXIT MENU – LEAVING THE SETUP UTILITY The Exit Menu is used to leave the setup utility. Follow The following table shows the names of the menu fields the instructions for Navigating Through the Setup for the Exit menu, the default settings and a description Utility to make any changes.

This manual also for:

M2010

Comments to this Manuals

Symbols: 0
Latest comments: