Fujitsu LifeBook M2010 Manual

Fujitsu LifeBook M2010 Manual

Hide thumbs Also See for LifeBook M2010:

Advertisement

Quick Links

Copyright
Fujitsu has made every effort to ensure the
accuracy and completeness of this document.
However, as ongoing development efforts are
continually improving the capabilities of our
products, we cannot guarantee the accuracy
of the contents of this document. We disclaim
liability for errors, omissions or future changes.
LifeBook is a trademark of Fujitsu Limited.
Microsoft, Windows, MS, MS-DOS, Windows NT,
Windows XP and Windows Vista are registered
trademarks of the Microsoft Corporation of the
United States in the United States and other
countries.
Phoenix is a registered trademark of Phoenix
Technologies Corporation of the United States.
Copyright© 1981-1999 Microsoft Corporation,
All rights reserved.
0_JOG_M2010_Intr_EN.indd 1
Copyright© 2009 Phoenix Technologies, Ltd., All
rights reserved.
Other product names are trademarks or registered
trademarks of their respective companies.
© Copyright 2009 Fujitsu. All rights reserved.
No part of this publication may be copied,
reproduced or translated, without the prior written
consent of Fujitsu. No part of this publication may
be stored or transmitted in any electronic form
without the written consent of Fujitsu.
This device complies with Part 15 of the FCC
rules. Operations are subject to the following
two conditions:
(1) This device may not be allowed to cause
harmful interference.
(2) This device must accept any interference
received, including interference that may
cause undesired operation.
Website: hk.fujitsu.com/pc
DECLARATION OF CONFORMITY
according to FCC Part 15
Copyright
3/10/09 11:17:01 AM
i

Advertisement

Table of Contents
loading

Summary of Contents for Fujitsu LifeBook M2010

  • Page 1 No part of this publication may be copied, liability for errors, omissions or future changes. reproduced or translated, without the prior written consent of Fujitsu. No part of this publication may LifeBook is a trademark of Fujitsu Limited. be stored or transmitted in any electronic form without the written consent of Fujitsu.
  • Page 2 IMPORTANT SAFETY 9. If an extension cord is used with this product, make sure that the total ampere rating of the INSTRUCTIONS equipment plugged into the extension cord 1. Read these instructions carefully. Save these does not exceed the extension cord ampere instructions for future reference.
  • Page 3 Copyright 13. CAUTION: When replacing the battery, be sure to install it with the polarities in the correct position. There is a danger of explosion if the battery is replaced with an incorrect type or is mistreated. Do not recharge, disassemble or dispose of in fire.
  • Page 4 The Load Number assigned to each telephone For Authorized Repair Technicians Only terminal device denotes the percentage of the total load to be connected to a telephone loop or circuit which is used by the device to prevent overloading. The termination on a loop may For continued protection against risk of consist of any combination of devices such that fire, replace only with the same type and...
  • Page 5 If you send this product to Fujitsu, or any of its industrial use. affiliates, suppliers, service providers or resellers for repair, Fujitsu does not guarantee the data This product is not designed for or intended for integrity.
  • Page 6 Safety notes • During installation and before operating the device, observe the instructions on environmental conditions in the manuals of Please read these safety the device. instructions before using the • Do not drop the device and protect it from device for the first time severe shocks.
  • Page 7 Use only mains adapters and the device is close to the socket. rechargeable batteries approved by Fujitsu • We recommend that you place your device for your device.
  • Page 8 • • In the event of a thunderstorm, all data If the device is installed in a cabinet or a transfer cables (modem/LAN/PC card drawer, sufficient ventilation must be provided. modem, CF-LAN card, CF-WLAN card) Otherwise damage from overheating may should be removed at the wall from the result.
  • Page 9 Make sure that you also switch off the excluded. attached monitor and/or other peripherals • Only use headphones recommended by when you switch off the device. Fujitsu. Otherwise there is a risk of hearing damage due to excessive volume. 0_JOG_M2010_Intr_EN.indd 9 3/10/09 11:17:05 AM...
  • Page 10 Additional safety notes for connector cables and devices which have devices with radio components not been specified by Fujitsu. The user is solely responsible for repairing faults arising from such unauthorised changes made to a The following additional safety notes apply device and for replacing and / or exchanging for devices with radio components (e.g.
  • Page 11: Table Of Contents

    T a b l e o f C o n t e n t s Table of Contents GETTING TO KNOW YOUR Wireless LAN/Bluetooth radio components .......... 15 NOTEBOOK ........1 Wireless LAN and Bluetooth - Names of the parts and their switching on and off ......
  • Page 12 T a b l e o f C o n t e n t s 2_JOG_M2010_TOC_EN.indd 12 3/2/09 5:20:31 PM...
  • Page 13: Getting To Know Your Notebook

    Getting To Know Your Notebook Names of the parts and 6. Stereo Speakers their functions 7. Touch Pad 8. Status Indicator LED Front features of the notebook This chapter presents the individual hardware components of your M2010. It gives an overview of the displays and connections to the device.
  • Page 14: Right/Left Features Of The Notebook

    Right / Left features of the notebook 9. Anti-Thief Lock Slot 10. LAN (RJ-45) Jack 11. USB 2.0 Ports 12. Microphone Jack 13. Headphone Jack 14. SD / MS Card Slot 15. External Video Port 16. Air Vents 17. DC Power Jack 3_JOG_M2010_P1-3_EN.indd 2 3/2/09 5:21:07 PM...
  • Page 15: Bottom Features Of The Notebook

    Getting To Know Your Notebook Bottom features of the notebook 18. Lithium Ion Battery 19. Battery Latches 20. Memory Upgrade Compartment 21. Stereo Speakers 3_JOG_M2010_P1-3_EN.indd 3 3/2/09 5:21:08 PM...
  • Page 16: Notebook: Switching Off

    Notebook: switching off • Shut down the operating system properly (in Windows via the Start menu by clicking Start Symbol – Shut Down – Shut Down – OK). • If notebook switched automatically, press the ON / OFF switch for about five seconds. •...
  • Page 17: Status Indicators

    Getting To Know Your Notebook Status indicators Power indicator The status indicators provide information about The Power indicator symbol located the status of the power supply, the drives on the power button shows whether and the keyboard functions. Three indicators your system is operational.
  • Page 18: Keyboard

    Keyboard Caps Lock key The Caps Lock key activates the Caps Lock mode, and the corresponding icon is displayed in the Windows information area. In Caps The keyboard of your notebook is subject Lock mode, all of the to continuous wear through normal use. characters you type appear The key markings are especially prone to in upper case.
  • Page 19: Virtual Numeric Keypad

    Getting To Know Your Notebook Illustration Virtual numeric keypad Other key combinations are described in the relevant manuals supplied with your application To provide the convenience of a numeric keypad, programs. your keyboard is equipped with a virtual numeric keypad. The special keys of the virtual numeric Key combinations are entered as follows: keypad are recognisable by the numbers and •...
  • Page 20: Country And Keyboard Settings

    Switch between open Pressing while holding applications allows you to switch ON and Use this key combination OFF of the WLAN. to switch between several open applications. Pressing repeatedly while holding will lower the Perform warm reboot brightness of your display. Ctrl Note that...
  • Page 21: Touchpad And Touchpad Buttons

    Getting To Know Your Notebook Cursor Control Left Button Right Button Touchpad and touchpad Using touchpad buttons buttons Moving the pointer • Move your finger on the touchpad. • The pointer will move accordingly. Selecting an item • Move the pointer to the item you wish to Keep the touchpad clean.
  • Page 22: Lcd Screen

    LCD Screen Webcam Screen settings your notebook is equipped with a WebCam. Depending on the software used, you can take Setting the resolution pictures, record video clips or take part in web chats. The screen resolution of the LCD monitor of your notebook is optimally set at the factory.
  • Page 23: Battery

    To do this, leave your notebook turned on when it is operated with the battery. Once the battery is running low you will hear a Only use batteries approved by Fujitsu for warning alarm. If you do not connect the mains your notebook.
  • Page 24 Battery removing Battery lock positions: • Push the battery lock (1) in the direction of the arrow. • The battery is released. Slide the battery lock in the direction of the arrow (2) and hold it in place. • Remove the battery from the battery compartment (3).
  • Page 25: Using The Power-Management Features

    Getting To Know Your Notebook Using the power- management features If you need further information about an option, you can get help with most settings The notebook uses less power when the by pressing to open the Microsoft Help. available power-management features are used.
  • Page 26: Memory Cards

    Memory cards Removing the memory card Your notebook is equipped with an integrated memory card reader. It supports the following formats: In order to protect your data, always follow the correct procedure for removing the Without adapter: • card outlined below. Secure Digital (SDTM card) •...
  • Page 27: Hard Disk

    files from external data The installation of a wireless LAN/Bluetooth carriers, such as CDs/DVDs or USB storage module not approved by Fujitsu voids the media, to your hard disk. permits (CE!) issued for this device. Loudspeakers and...
  • Page 28: Ethernet And Lan

    Ethernet and LAN The internal network module of your notebook supports Ethernet-LAN (10/100 Mbps). This allows you to establish a connection to a local network (LAN = Local Area Network). • Connect the network cable to the LAN port of the notebook (1).
  • Page 29: Security Functions

    S ecur it y Functi ons Security functions Configuring password protection in BIOS Setup Your notebook has several security features Utility that you can use to secure your system from unauthorised access. This chapter explains how to use each function, and what the benefits are.
  • Page 30: Protecting Bios Setup Utility (Supervisor And User Password)

    • Protecting BIOS Setup Utility In the Exit menu, select the option Save Changes & Exit. (supervisor and user password) • Select Yes and press the Enter key. • The notebook will be rebooted and the new password will come into effect. It will now be necessary to first enter your supervisor If you have opened these operating or user password in order to open the BIOS...
  • Page 31: Password Protection For Booting Of The Operating System

    S ecur it y Functi ons Password protection for booting of the operating system With the supervisor password you have set in the BIOS Setup Utility (see section "Setting supervisor and user password", Page 18) , you can also prevent booting of the operating system.
  • Page 32: Connecting External Devices

    Connecting external devices Connecting an external monitor You can connect an external monitor to the analogue VGA monitor connection of the Always refer to the safety information notebook. Screen output is limited to a maximum provided in "Important Safety Instructions", of two screens at any one time.
  • Page 33: Setting The Refresh Rate For Your External Monitor

    Connecti ng E xter nal Dev ic es Setting the refresh rate for your Connecting USB devices external monitor On the USB ports you can connect external devices that also have a USB port (e.g. a printer, a scanner or a modem). If the refresh rate set is too high, the monitor may be damaged.
  • Page 34: How To Remove Usb Devices Correctly

    Headphone port How to remove USB devices correctly You can use the headphone port to connect headphones, external loudspeakers or an audio device with a digital optical input to your notebook. Always correctly remove the device according to the rules described below, to ensure that none of your data is lost.
  • Page 35: Troubleshooting And Tips

    T r o u b l e s h o o t i n g a n d t i p s Troubleshooting and tips Problem Possible Cause Possible Solution With the BIOS-Setup-Utility, you can set the The notebook’s date Time and date are date and time in the main menu.
  • Page 36 Problem Possible Cause Possible Solution The external The wrong external Terminate the application program in monitor is blank monitor has been selected Windows by pressing . If the fault or the image is or the wrong screen persists after closing the program, switch unstable resolution has been set for over to the notebook’s internal LCD screen...
  • Page 37 T r o u b l e s h o o t i n g a n d t i p s Problem Possible Cause Possible Solution The notebook Notebook is in energy Leave energy saving mode. stops working saving mode. An application programme Close the application program or restart the has caused the...

Table of Contents