First-Time Setup Of Your Device; Unpacking And Checking The Device - Fujitsu M2010 Operating Manual

First-time setup of your device

First-time setup of your device
Gettingstarted First-timesetup
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
A system test is performed when your device is first switched on. Various messages
can appear. The display may remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time setup process.
You must charge the battery before you can work with your device for the first time.
On delivery, the battery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery provides the device with the necessary power. You
can increase the operating time by using the available energy-saving functions.
If you use the device at home or in an office, we recommend you use the
mains adapter instead of the battery.
For instructions on how to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating manual for your device.

Unpacking and checking the device

Should you discover any damage that occurred during transportation,
notify your local sales outlet immediately!
► Unpack all the individual parts.
Transport Packaging
► Check your device for any visible damage which may have occurred during transportation.
We recommend that you keep the original packaging material.
You may need the packaging in the future, if you need to transport your device.
8 A26391-K245-Z220-1-7619, edition 1