Settings; Arpndsettings - D-Link DFL-260E Manual

3.52. Settings

3.52. Settings
This is a category that groups the following object types.

3.52.1. ARPNDSettings

Description
Advanced ARP/Neighbor Discovery-table settings.
Properties
ARPMatchEnetSender
ARPQueryNoSenderIP
ARPSenderIP
UnsolicitedARPReplies
ARPRequests
ARPChanges
StaticARPChanges
ARPExpire
ARPExpireUnknown
ARPMulticast
ARPBroadcast
ARPCacheSize
ARPHashSize
ARPHashSizeVLAN
LogResolveFailure
NDRateLimit
Chapter 3. Configuration Reference
The Ethernet Sender address matching the hardware
address in the ARP data. (Default: DropLog)
If the IP source address of an ARP query (NOT re-
sponse!) is "0.0.0.0". (Default: DropLog)
The IP Source address in ARP packets. (Default:
Validate)
Unsolicited ARP replies. (Default: DropLog)
Specifies whether or not the ARP requests should
automatically be added to the ARP table. (Default:
Drop)
ARP packets that would cause an entry to be
changed. (Default: AcceptLog)
ARP packets that would cause static entries to be
changed. (Default: DropLog)
Lifetime of an ARP entry in seconds. (Default: 900)
Lifetime of an "unknown" ARP entry in seconds.
(Default: 3)
ARP packets claiming to be multicast addresses;
may need to be enabled for some load balancers/
redundancy solutions. (Default: DropLog)
ARP packets claiming to be broadcast addresses;
should never need to be enabled. (Default: DropLog)
Number of ARP entries in cache, total. (Default:
4096)
Number of ARP hash buckets per physical interface.
(Default: 512)
Number of ARP hash buckets per VLAN interface.
(Default: 64)
Specifies whether or not to log failed ARP Resolves.
(Default: Yes)
Rate limit originated ND packets. (Default: 1000)
171