Sshserver - D-Link DFL-260E Manual

2.2.52. sshserver

-definition
-flags=<String>
-registration[={SHOW | FLUSH}]
-session
-snoop={ON | OFF | VERBOSE}
-statistics[={SHOW | FLUSH}]
<alg>
<ipaddr>
2.2.52. sshserver
SSH Server.
Description
Show SSH Server status, or start/stop/restart SSH Server.
Usage
sshserver
Show server status and list all connected clients.
sshserver -status [-verbose]
Show server status and list all connected clients.
sshserver -keygen [-b=<bits>] [-t={RSA | DSA}]
Generate SSH Server private keys.
sshserver -restart <ssh server>
Restart SSH Server.
Options
-b=<bits>
-keygen
-restart
Show running ALG configuration parameters.
SIP snooping for certain levels. Expected number in
hexadecimal notation.
Show or flush registration table. (Default: show)
Show active SIP sessions.
Enable or disable SIP snooping. NOTE: 'verbose' op-
tion outputs a lot of information on the console
which may lead to system instability. Use with cau-
tion.
Show or flush SIP counters. (Default: show)
SIP-ALG name.
IP Address to snoop.
Bitsize. (Default: 1024)
Generate SSH Server private keys. This operation
may take a long time to finish, up to several minutes!
Stop and start the SSH Server.
64
Chapter 2. Command Reference