Logreceiversyslog - D-Link DFL-260E Manual

3.37.4. LogReceiverSyslog

HoldTime
MinRepeatDelay
LogThreshold
Comments
3.37.4. LogReceiverSyslog
Description
A Syslog receiver is used to receive log events from the system in the standard Syslog format.
Properties
Name
IPAddress
Port
Facility
LogSeverity
Comments
3.37.4.1. LogReceiverMessageException
The definitions here are the same as in Section 3.37.1.1, "LogReceiverMessageException" .
Chapter 3. Configuration Reference
The hold time in seconds during which the log
threshold must be reached for an email to be sent.
(Default: 120)
The amount of seconds the security gateway will
wait before sending another email. (Default: 600)
The number of events that have to occur within the
hold time for an email to be sent. (Default: 2)
Text describing the current object. (Optional)
Specifies a symbolic name for the log receiver.
(Identifier)
Specifies the IP address of the log receiver.
Specifies the port number of the log service.
(Default: 514)
Specifies what facility is used when logging.
(Default: local0)
Specifies with what severity log events will be sent
to the specified log receivers. (Optional; Default:
Emer-
gency,Alert,Critical,Error,Warning,Notice,Info)
Text describing the current object. (Optional)
146