Hwmsettings; Icmpsettings - D-Link DFL-260E Manual

3.52.7. HWMSettings

IP6ReassIllegalLinger
3.52.7. HWMSettings
Description
General settings for Hardware Monitoring
Properties
EnableSensors
SensorPollInterval
MemoryPollInterval
MemoryUsePercent
MemoryLogRepetition
MemoryAlertLevel
MemoryCriticalLevel
MemoryWarningLevel

3.52.8. ICMPSettings

Description
Settings related to the ICMP protocol.
Properties
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3. Configuration Reference
(watching for old dups). (Default: 20)
How long to remember an illegal reassembly
(watching for more fragments). (Default: 60)
Enable/disable all HWM functionality. (Default: No)
Sensor polling interval. (Default: 500)
Memory polling interval in minutes. (Default: 15)
Should mem monitor use percentage as unit for
monitoring, else it is megabyte. (Default: Yes)
Should a log message be sent for each poll result that
is in the Alert, Critical or Warning level, or should a
log message only be sent when a new level is
reached. (Default: No)
Alert log message if free memory is below this
value, disable by using 0. (Default: 0)
Critical log message if free memory is below this
value, disable by using 0. (Default: 0)
Warning log message if free memory is below this
value, disable by using 0. (Default: 0)
176