Si10-416_B
5.9 MOLD PROOF Operation
MOLD PROOF operation is a function which reduces the spread
of mold by using Fan mode to lower the humidity inside the
indoor unit.
To set MOLD PROOF operation
1. Press and hold the MOLD PROOF
button for two seconds.
• "
" is displayed on the LCD.
To cancel MOLD PROOF
operation
2. Press and hold the MOLD PROOF
button for two seconds one more time.
• "
" disappears from the LCD.
NOTE
• MOLD PROOF operation will operate for approximately
one hour after dry or cooling mode is turned off.
• This function is not designed to remove existing dust or
mold.
• MOLD PROOF operation is not available when the unit
is turned off using the OFF TIMER.
Operation
ARC433 Series
369