Si10-416_B
ATTENTION
About remote controller
• Never expose the remote controller to direct sunlight.
• Dust on the signal transmitter or receiver will reduce the
sensitivity. Wipe off dust with soft cloth.
• Signal communication may be disabled if an electronic-
starter-type fluorescent lamp (such as inverter-type
lamps) is in the room. Consult the shop if that is the case.
• If the remote controller signals happen to operate another
appliance, move that appliance to somewhere else, or
consult the shop.
Operation
ARC433 Series
355
Need help?
Do you have a question about the ARC433B46 and is the answer not in the manual?