GE Simon XT User Manual page 20

10 Simon XT
User Manual
Arming/disarming
Arming a sensor makes it active and allows the panel to generate an alarm when a door or window is opened,
or when an unauthorized person enters a specific area. Disarming makes the sensor inactive in the system. The
current arming level is shown on the panel display and changes in arming level are announced on the speaker.
Subdisarm
1. Enter the master code while the system is disarmed.
2. The panel displays and speaks Subdisarmed, the DISARM button blinks, and the panel beeps once.
3. When you've finished accessing the temporarily unprotected areas, press DISARM to return to
Disarmed.
Disarm (off)
1. Press DISARM, then enter your code when the panel displays Enter Code.
2. The panel displays and speaks Disarmed, the DISARM button lights up, and the panel beeps once.
Arming doors and windows
1. Ensure that all doors and windows are closed.
2. Press DOORS+WINDOWS, then enter your code when the panel displays Enter Code, if a code is
required.
3. The panel displays Doors + Windows, speaks Doors and Windows On, and the DOORS+WINDOWS
button lights up.
4. The panel starts an exit delay, and sounds exit beeps in groups of 2 until the exit delay expires.
Arming motion sensors
1. Press MOTIONS, then enter your code when the panel displays Enter Code, if a code is required.
2. The panel displays Motions, speaks Motions On, and the MOTIONS button lights.
3. The panel starts an exit delay and sounds exit beeps in groups of 3 until the exit delay expires.
Arming doors, windows, and motion sensors
1. Press DOORS +WINDOWS, then enter your code when the panel displays Enter Code, if a code is
required.
2. While the panel is in the process of arming, press MOTIONS.
3. The panel displays Doors + Windows & Motions, speaks Doors and Windows On, Motions On, and the
DOORS+WINDOWS and MOTIONS buttons light up.
4. The panel starts an exit delay and sounds exit beeps in groups of 4 until the exit delay expires.