GE Simon XT User Manual page 43

Panel Piezo Alrm
This option determines whether or not the panel sounds alarm beeps.
To program Panel Piezo Alrm:
1. Enter the System Programming menu.
2. Scroll up/down to Siren Options, then press Enter.
3. Scroll up/down to Panel Piezo Alrm, then press Enter.
4. The current value of this option now flashes (On or Off).
5. Scroll up/down to the desired value, then press Enter.
6. Press STATUS repeatedly to exit.
Status Beep Vol
This option sets the sound volume of nonalarm beeps. The numerical range is 1 to 10. The default value is 7.
To program Status Beep Vol:
1. Enter the System Programming menu.
2. Scroll up/down to Siren Options, then press Enter.
3. Scroll up/down to Status Beep Vol, then press Enter.
4. The current value of this option now flashes (1 to 10).
5. Scroll up/down to the desired value, then press Enter.
6. Press STATUS repeatedly to exit.
Speaker Volume
This option sets the sound volume of the panel speaker for key presses and alarm sounds. The numerical range
is 1 to 8. The default value is 8.
To program Speaker Volume:
1. Enter the System Programming menu.
2. Scroll up/down to Siren Options, then press Enter.
3. Scroll up/down to Speaker Volume, then press Enter.
4. The current value of this option now flashes (1 to 8).
5. Scroll up/down to the desired value, then press Enter.
6. Press STATUS repeatedly to exit.
Chapter 4 33
Programming