Menu Navigation - GE Simon XT User Manual

Menu navigation

Each menu contains a list of options and/or submenus. Press the scroll up/down buttons to navigate up and
down the list of options and submenus in that menu. Pressing Enter after navigating to an option selects that
option for editing and flashes the current value. Pressing Enter after navigating to a submenu enters that
submenu, making a new list of options accessible. Pressing STATUS exits a menu and goes to the next higher
level.
Programming options are arranged in a menu structure as outlined in Table 12. The top menu contains several
features, as well as the System Programming menu. When accessing the System Programming or System Tests
menu, the panel prompts you to enter an access code. To continue, enter the master code, then press Enter.
To program an option, first navigate to that option until it is displayed, then press Enter. The option value will
start flashing, indicating that it is ready to be changed. Use the scroll keys or enter a numerical value to change
the option, then press the Enter key to save the change.
Table 12. Simon XT system menu structure
Top menu entry
Set Clock
Light Schedules
Sensor Lights
Chime
Special Chime
System Tests
System Programming
First submenu level
Sensor Test
Comm Test
System Download
Access Codes
Security
Phone #s
Timers
Siren Options
Light Control
Second submenu level
Master Code
User Code 1 to 8
Duress Code
Download Enable
Phone #4
Latchkey Time
Piezo Beeps
Panel Voice
Panel Piezo Alrm
Status Beep Vol
Speaker Volume
Set Entry Lights
Sensor Light
Light Schedules
Housecode
Lock Interval
Chapter 4 25
Programming