Foxconn A76GMV User Manual page 54

Create RAID array
Here we create RAID 0 as an example:
1. Press [2] in the main menu, "Define LD Menu" appears and the "LD 1" row is highlight, press
[Enter], the scree is shown as below:
2. Press [Space] to select RAID 0.
3. Use [↓] key to highlight the hard disks, change any two of the drives' "Assignment" status to "Y"
by pressing [Space] or [Y].
4. Press [Ctrl-Y] to save the setting, a message prompts:
5. Press [Ctrl-Y] to clear the RAID array or press any other key to continue, another prompt ap-
pears:
6. Press [Ctrl-Y] to key in the capacity of the RAID array or press any other key to set the array to
its maximum. Then you will see the created array:
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
LD No RAID Mode
LD 1 RAID 0
RAID 0
Stripe Block: 64 KB
Gigabyte Boundary: ON
Channel :ID Drive Model
1 :Mas XXXXXXXXXXX
2 :Mas XXXXXXXXXXX
3 :Mas XXXXXXXXXXX
4 :Mas XXXXXXXXXXX
[↑] Up [↓] Down [ESC] Exit [Space] Change [Crtl-Y] SAVE [PgUp/Dn] Page Change
Fast Initialization Option has been selected
It will erase the MBR data of the disks,
<Press Ctrl-Y Key if you are sure to erase it>
<Press any other key to ignore this option>
Press Ctrl-Y to Modify Array Capacity or press any
other key to use maximum capacity...
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
LD No RAID Mode
LD 1 RAID 0
LD 1 RAID 0
LD 2 −−−−
LD 3 −−−−
LD 4 −−−−
LD 5 −−−−
LD 6 −−−−
LD 7 −−−−
LD 8 −−−−
LD 9 −−−−
LD10 −−−−
[↑] Up [↓] Down [ESC] Exit
[ Define LD Menu ]
[ Define LD Menu ]
Total Drv
2
Fast Init:
Cache Mode:
[ Drives Assignment ]
Compatibilities Capacity(GB)
SATA XG XX.XX
SATA XG XX.XX
SATA XG XX.XX
SATA XG XX.XX
[ Keys Available ]
[ Define LD Menu ]
[ Define LD Menu ]
Total Drv Capacity(GB)
2 163.99
2 XX.XX
−−−− −−−−−−−−
−−−− −−−−−−−−
−−−− −−−−−−−−
−−−− −−−−−−−−
−−−− −−−−−−−−
−−−− −−−−−−−−
−−−− −−−−−−−−
−−−− −−−−−−−−
−−−− −−−−−−−−
[ Keys Available ]
[Enter] Select
47
ON
WriteThru
Assignment
Y
Y
N
N
Status
Functional
Functional
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−
−−−−