Usb Configuration; Superio Configuration - Foxconn A76GMV User Manual

USB Configuration

CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
USB Configuration
USB Devices Enabled :
OnBoard USB Controller
USB 2.0 Controller
USB 2.0 Controller Mode
Legacy USB Support
► OnBoard USB Controller
This item is used to enable or disable the onboard USB controller.
► USB 2.0 Controller
This item is used to enable or disabled the enhanced host controller interface for USB.
► USB 2.0 Controller Mode
This item is used to set the transmission rate mode of USB 2.0. This function only works un-
derDOS mode. The available settings are: [High Speed] in 480Mbps; [Full Speed] in 12Mbps.
► Legacy USB Support
This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.

SuperIO Configuration

SuperIO Configuration
Serial Port1 Address
Serial Port1 Mode
USB Configuration
None
↑↓←→:Move Enter:Select
F1:General Help
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
SuperIO Configuration
↑↓←→:Move Enter:Select
F1:General Help
Disabled
[Enabled] [Enabled] Enabled
[Enabled]
[High Speed]
[Enabled]
+/-/:Value F10:Save
F9:Optimized Defaults
[3F8/IRQ4]
Allows BIOS to select
[Normal] serial port1 base
address.
+/-/:Value F10:Save
F9:Optimized Defaults
38
Help Item
Options
ESC:Exit
Help Item
ESC:Exit