Bios Security Features; Load Optimal Defaults; Save & Exit Setup; Exit Without Saving - Foxconn A76GMV User Manual

BIOS Security Features

CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Scurity Settings
Supervisor Password
User Password
Change Supervisor Password
► Change Supervisor Password
This item is used to install or change supervisor password.
After you input Supervisor password, it then will ask you to
input user password optionally.

Load Optimal Defaults

Optimal defaults are the best settings of this motherboard. Always load the Optimal defaults after
updating the BIOS or after clearing the CMOS values.
Select this option and press Enter, it will pop out a dialogue box to let you load the defaults.
Select <OK> and then press <Enter> to load the defaults. Select <Cancel> and press <Enter>, it
will not load.
By this default, BIOS have set the optimal performance parameters
of system to improve the performances of system components. But if
the optimal performance parameters to be set cannot be supported by
your hardware devices (for example, too many expansion cards were
installed), the system might fail to work.
Save & Exit Setup
When you select this option and press <Enter>, a message will be displayed in the center of the
screen:
Select [OK] to save your changes to CMOS and exit the
program, select [Cancel] or <ESC> to return to the main
menu.

Exit Without Saving

If you select this option and press <Enter>, the following message
will be displayed in the center of the screen:
Select [OK] to exit CMOS without saving your modifications,
select [Cancel] or <ESC> to return to the main menu.
BIOS Security Features
: Not Installed
: Not Installed
[Press Enter]
[Press Enter]
↑↓←→:Move Enter:Select
F1:General Help
Help Item
Enter or change the
password.
+/-/:Value F10:Save ESC:Exit
F9:Optimized Defaults
Enter New Password :
Save configuration changes and exit setup?
[OK]
[OK]
43
Load Optimal Defaults?
[OK] [OK] [Cancel]
[Cancel]
Discard changes and exit setup?
[OK] [OK] [Cancel]