Foxconn A76GMV User Manual page 23

Fan Connectors : CPU_FAN, SYS_FAN
There are two main fan headers on this motherboard.
The fan speed can be controlled and monitored in "PC
Health Status" section of the BIOS Setup. These fans
can be automatically turned off after the system enters
S3, S4 and S5 sleeping states.
S/PDIF OUT Connector : SPDIF_OUT
The connector is used for S/PDIF output.
Chassis Intruder Alarm Connector : INTR
The connector can be connected to a security switch
on the chassis. The system can detect the chassis
intrusion through the function of this connector. If
eventually the chassis is closed, the system will send
a message out.
+5V 1
EMPTY
2
SPDIF_OUT
3
GND
4
SPDIF_OUT
CPU_FAN/SYS_FAN
INTRUDERJ
16
1
GND
POWER
SENSE
CONTROL
1
GND
INTR