Pc Health Status - Foxconn A76GMV User Manual

PC Health Status

Warning Temperature
Shut Down Temperature
Case Open Warning
CPU Temperature(Tcontrol)
System Temperature
CPU Fan Speed
System Fan Speed
CPU Core
DRAM Voltage
HT Voltage
+12.0V
+5.0V
CPU Smart Fan Function
Start PWM Temperature
Start PWM Value
Slope PWM Value
System Smart Fan Function
Start PWM Temperature
► Warning Temperature
This option is used to set the warning temperature for the system. When the temperature of
CPU is higher than the set value, the motherboard will send out warning beep.
► Shut Down Temperature
This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
This function works only when your operating system is supporting ACPI.
► Case Open Warning
This item is used to enable or disable case open warning function.
► CPU Temperature(Tcontrol)/System Temperature
The CPU/System temperature are automatically detected and displayed by the system.
► CPU Fan/System Fan Speed
The CPU fan/System fan speed are automatically detected and displayed by the system.
► CPU Core/DRAM Voltage/HT Voltage/+5.0V/+12.0V
The current voltages are automatically detected and displayed by the system.
► CPU Smart Fan Function / System Smart Fan Function
This option is used to enable or disable smart fan function.
► Start PWM Temperature
It allows you set a temperature value from which smart fan starts its operation.
► Start PWM Value
It allows you to set an initial PWM value to drive the fan when the temperature reaches Start
value and smart fan begins its operation. The higher PWM value can achieve the faster fan
speed.
► Slope PWM Value
The slope controls the PWM value being stepped up or down versus temperature changes.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
↑↓←→:Move Enter:Select
F1:General Help
PC Health Status
[Disabled] [Disabled]
[Disabled]
[Disabled]
:40 C/104 F
o o
:28 C/82 F Disabled
o o
:3183 RPM 50
:N/A 55
60
:1.296 V 65
:1.620V 70
:1.224V
:12.229V
:4.983V
[Enabled]
[035]
[064]
[2 PWM]
[Enabled]
[035]
+/-/:Value F10:Save
F9:Optimized Defaults
42
Help Item
Options
C/122 F
o o
C/131 F
o o
C/140 F
o o
C/149 F
o o
C/158 F
o o
ESC:Exit