Call Waiting Function; Calling A Number From Contacts; Adjusting Volume; Caller Id Function - Pantech Jest User Manual

CALL WAITING FUNCTION

If you are on a call and you receive another incoming call, you will hear a beep and the
caller' s phone number will appear on the display. With Call Waiting, you may put the
active call on hold while you answer the other incoming call.
1. To answer another call while on the phone, press the SEND Key
This places the first call on hold. To switch back to the first caller, press the SEND
Key again.

CALLING A NUMBER FROM CONTACTS

1. From idle mode, press the OK Key to unlock the keypad, then press the Right
Soft Key [Contacts].
2. Select the Contact entry and press the OK Key [VIEW], then select the desired
phone number.
3. Press the SEND Key to place the call.
Selecting the Contact entry and then pressing the Send Key
Number of the Contact entry automatically.

ADJUSTING VOLUME

TO ADJUST THE MASTER VOLUME:
1. From idle mode, press the OK Key to unlock the keypad, then press the Volume
Keys / up or down.
2. Select one of the following options and press the OK Key [SET] to save it.
• All Sounds Off
• Alarm Only
• Vibrate Only
• Low / Medium Low / Medium / Medium High / High
• Press the Volume Keys / up or down to adjust Earpiece volume during a call.
32
.
will dial the Default

CALLER ID FUNCTION

Caller ID displays the number of the person calling when your phone rings. If the
caller' s identity is stored in Contacts, the name appears on the screen. The caller ID
is stored in the Recent Calls menu.

VIBRATE MODE

Vibrate Mode mutes key tones and alerts for an incoming call or message. To activate
Vibrate Mode:
1. Slide the phone up, then press and hold the Vibration Mode Key
activate vibration mode.
2. To deactivate vibration mode, press and hold the Vibration Mode Key

SPEAKERPHONE MODE

The Speakerphone feature lets you hear audio through the speaker and talk without
holding the phone.
1. To activate, press the OK Key to unlock the keypad, then press the
Speakerphone Key . To deactivate, press the Speakerphone Key again.
USING AUTO KEYPAD LOCK FUNCTION
When the slide is closed the Side Keys and the Directional Key are locked. To
unlock them, press any key on the external display with the phone in the closed
position "PRESS OK TO UNLOCK KEYPAD" displays. Press the OK Key to unlock
the keypad.

AVAILABLE OPTIONS DURING A CALL

During a phone call, you can access the following features by pressing the Right Soft
Key [Options]:
01
02
03
04
to
05
.
06
07
33