Default Numbers - Pantech Jest User Manual

4. Edit the phone number as necessary, and then press the OK Key [SAVE] to
update the contact entry.
EDITING STORED NAMES
1. Slide the phone up, then press the Right Soft Key
Your Contacts are displayed alphabetically.
2. Highlight the Contact entry you want to edit, then press the Left Soft Key
[Edit].
3. Edit the name as necessary, and then press the OK Key [SAVE] to update the
contact entry.
DELETING A PHONE NUMBER FROM A CONTACT
1. From idle mode, press the OK Key to unlock the keypad, then press the Right
Soft Key [Contacts].
2. Highlight the Contact entry, then press the Left Soft Key
3. Select the desired phone number to be deleted.
4. Press and hold the Clear Key
5. Press the OK Key [SAVE] to update the contact entry. A confirmation message
appears.
DELETING A CONTACT ENTRY
1. From idle mode, press the OK Key to unlock the keypad, then press the Right
Soft Key [Contacts].
2. Select the desired Contact entry to be deleted.
3. Press the Right Soft Key
4. Select Yes and press the OK Key. A confirmation message appears.
DELETING A SPEED DIAL
1. From idle mode, press the OK Key to unlock the keypad, then press the Right
Soft Key [Contacts].
42
[Contacts].
[Edit].
to delete the number.
[Options], select 2. Erase and press the OK Key.
2. Highlight the entry that has a speed dial to be deleted.
3. Press the Left Soft Key [Edit].
4. Highlight the phone number that has a speed dial to be deleted.
5. Press the Right Soft Key [Options], select
press the OK Key.
6. Select Yes and press the OK Key. A confirmation message appears.
7. Press the OK Key [SAVE] to update the contact entry.

DEFAULT NUMBERS

The phone number saved when a Contact is created is the Default Number. If more
than one number is saved in a Contact entry, another number can be set as the Default
Number.
The Default Number cannot be deleted. The entire Contact entry can be deleted or
another number can be assigned as the Default Number allowing you to delete the
original number and keep the Contact entry.
CHANGING THE DEFAULT NUMBER
1. From idle mode, press the OK Key to unlock the keypad, then press the Right
Soft Key [Contacts]. Your Contacts are displayed alphabetically.
2. Highlight the Contact entry you want to edit, then press the Left Soft Key
[Edit].
3. Highlight the phone number you want to assign as the Default Number, then
press the Right Soft Key [Options].
4. Select 2. Set As Default, then press the OK Key.
5. Select Yes and press the OK Key. A confirmation message appears.
6. Press the OK Key [SAVE] to update the contact entry.
01
1. Remove Speed Dial and
02
03
04
05
06
07
43