Call Waiting Function; Key Guard; Etiquette; Adjusting Volume - Pantech TX-130C User Manual

Digital cdma2000 1xhandheld portable telephone
Table of Contents

Advertisement

TX_130C_TNZ_050601
2005.6.1
BASIC FUNCTIONS
BASIC FUNCTIONS

CALL WAITING FUNCTION

Notifies you of an incoming call when you are on the
phone by sounding a beep and displaying the caller's
phone number on the screen.
1. To answer another call while on the phone,
press
. This places the first call on hold.
2. To switch back to the first caller, press
NOTE:
Call Waiting is a network service, please call *123
to subscribe.

KEY GUARD

Your phone is equipped with a Key Guard function
which prevents the phone from operating when keys
are pressed accidentally, such as when you carry the
phone in your bag while it is switched on.
1. To lock the phone, press and hold
2. To unlock the phone, press any key then input the
password.
● Lock feature will deactivate when the phone is powered
off. Upon next powered up, you will need to press
to lock phone again.
● Press 1, 2, 3 to unlock the key guard.

ETIQUETTE

Mutes key tones and activates the vibration mode to
alert you of an incoming call or message.
1. To turn etiquette mode on/off, press and hold
Page 26 - Chapter 2
2:6 PM
Page 28
again.
.
.
BASIC FUNCTIONS
BASIC FUNCTIONS

ADJUSTING VOLUME

Volume can be adjusted by using the volume control
keys on the side of the handset, or by using the menu.
1. Press
[MENU]
following. To increase the volume press the
Navigation Key upwards or to the right. To lower the
volume, press it downwards or to the left.
● Ringer : Controls the ringer volume.
● Key Tone : Controls the key pad volume.
● Voice Call : Controls the earpiece volume.
● Messages : Controls the received messages alert volume.
● Speaker Phone : Controls the speaker volume.
● Power On : Controls the power on volume.
● Power Off : Controls the power off volume.
2. Adjust volume then press
NOTE:
To adjust the earpiece volume during a call,
press the volume keys on the side of the
phone or the Navigation Key (left or right).

CALLER ID FUNCTION

Identifies the caller by displaying their phone num-
ber. If the caller's name and number are already
stored in your phone book, they both will appear.
This feature is system dependent. Please contact
your service provider for details.
NOTE:
Caller ID calls are stored in the call history.
then select one of the
[OK] to save it.
Chapter 2 - Page 27

Advertisement

Table of Contents
loading

Table of Contents