Call Waiting Function; Calling A Number From Contacts; Adjusting Volume; Caller Id Function - Pantech Caper User Manual

3. When you're connected to the second party, press the SEND Key again to
begin your 3-Way call.
If one of the people you called hangs up during your call, you and the remaining caller
stay connected. If you initiated the call and are the first to hang up, all three calls will
be disconnected.

CALL WAITING FUNCTION

If you are on a call and you receive another incoming call, you will hear a beep and the
caller' s phone number will appear on the display. With Call Waiting, you may put the
active call on hold while you answer the other incoming call.
1. To answer another call while on the phone, press the SEND Key .
This places the first call on hold. To switch back to the first caller, press the SEND
Key again.

CALLING A NUMBER FROM CONTACTS

1. From the home screen, press the OK Key to unlock the keypad, then press the
Right Soft Key [Contacts].
2. Select the Contact entry and press the OK Key
desired phone number.
3. Press the SEND Key to place the call.
Selecting the Contact entry and then pressing the Send Key
Number of the Contact entry automatically.

ADJUSTING VOLUME

TO ADJUST THE MASTER VOLUME:
1. From the home screen, press the OK Key to unlock the keypad, then press the
Volume Keys / up or down.
30
[VIEW], then select the
will dial the Default
2. Select one of the following options and press the OK Key [SET] to save it.
All Sounds Off / Alarm Only / Vibrate Only
Medium High / High
• Press the Volume Keys / up or down to adjust Earpiece volume during a call.

CALLER ID FUNCTION

Caller ID displays the number of the person calling when your phone rings. If the
caller' s identity is stored in Contacts, the name appears on the screen. The caller ID
is stored in the Recent Calls menu.

VIBRATE MODE

Vibrate Mode mutes key tones and alerts for an incoming call or message. To activate
Vibrate Mode:
1. From the home screen, press and hold the Vibration Mode Key
vibration mode.
2. To deactivate vibration mode, press and hold the Vibration Mode Key

SPEAKERPHONE MODE

The Speakerphone feature lets you hear audio through the speaker and talk without
holding the phone.
1. To activate, press the OK Key to unlock the keypad, then press the
Speakerphone Key . To deactivate, press the Speakerphone Key
again.

USING AUTO KEYPAD LOCK FUNCTION

When the backlight of the display is turned off, the all keys are locked. To unlock
them, press any key on the external display with the phone in the closed position
"PRESS OK TO UNLOCK KEYPAD" displays. Press the OK Key to unlock the keypad.
/ Low / Medium Low / Medium /
01
02
03
04
05
06
07
to activate
.
31