Lexmark C2132 User Manual page 109

Understanding the printer menus
Use
Paper Saver Orientation
Auto
Landscape
Portrait
Paper Saver
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
Paper Saver Border
None
Solid
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Separator Sheet Source
Tray [x]
Manual Feeder
To
Specify the orientation of a multiple‑page document.
Notes:
•
Auto is the factory default setting. The printer chooses between portrait and
landscape.
• This setting affects jobs only when Paper Saver is set to any value other than
Off.
Print multiple‑page images on one side of the paper.
Notes:
•
Off is the factory default setting.
•
The number selected is the number of page images that will print per side.
Print a border on each page image when using Paper Saver Border.
Notes:
•
None is the factory default setting.
•
This setting affects jobs only when Paper Saver is set to any value other than
Off.
Specify the positioning of multiple‑page images when using Paper Saver Ordering.
Notes:
•
Horizontal is the factory default setting.
• Positioning depends on the number of page images and whether they are in
portrait or landscape orientation.
• This setting affects jobs only when Paper Saver is set to any value other than
Off.
Specify whether blank separator sheets are inserted.
Notes:
• Off is the factory default setting.
•
Between Copies inserts a blank sheet between each copy of a print job when
Collate is set to On. When Collate is set to Off, then a blank page is inserted
between each set of printed pages, such as after all page 1's and after all page
2's.
•
Between Jobs inserts a blank sheet between print jobs.
• Between Pages inserts a blank sheet between each page of the print job. This
setting is useful when printing transparencies or inserting blank pages in a
document for notes.
Specify the paper source for separator sheets.
Note: Tray 1 is the factory default setting.
109