Lexmark C2132 User Manual page 107

Understanding the printer menus
Use
Print Recovery (Continued)
Jam Recovery
On
Off
Auto
Print Recovery (Continued)
Page Protect
Off
On
Hibernate Timeout on Connection
Hibernate
Do Not Hibernate
Press Sleep Button
Do Nothing
Sleep
Hibernate
Press and Hold Sleep Button
Do Nothing
Sleep
Hibernate
GUI Log Level
Everything (0)
Keys (1)
Debug (2)
Warnings (3)
Errors (4)
Critical (5)
System Info (6)
To
Specify whether the printer reprints jammed pages.
Notes:
•
Auto is the factory default setting. The printer reprints
jammed pages unless the memory required to hold the
pages is needed for other printer tasks.
•
On sets the printer to always reprint jammed pages.
• Off sets the printer to never reprint jammed pages.
Let the printer successfully print a page that may not have printed
otherwise.
Notes:
• Off is the factory default setting. Off prints a partial page
when there is not enough memory to print the whole page.
• On sets the printer to process the whole page so that the
entire page prints.
Set the printer to follow the setting of "Hibernate Timeout" even
when an active Ethernet connection exists.
Notes:
•
If "Hibernate Timeout on Connection" is set to "Do Not
Hibernate," then the device never automatically hibernates.
•
If "Hibernate Timeout on Connection" is set to "Hibernate,"
then the device follows the value of the "Hibernate Timeout"
setting, except when it is set to Disabled.
•
"Do Not Hibernate" is the factory default setting.
Determine how the printer, while in idle state, reacts to a short
press of the Sleep button.
Note: Sleep is the factory default setting.
Determine how the printer, while in idle state, reacts to a long press
of the Sleep button.
Note: "Do nothing" is the factory default setting.
Store the amount of log files populated from the GUI component,
where each log entry is marked at a certain level.
107