Smtp Setup Menu - Lexmark CS510de User Manual

Understanding the printer menus
Use
ENA Gateway
yyy.yyy.yyy.yyy

SMTP Setup menu

Use
Primary SMTP Gateway
Primary SMTP Gateway Port
Secondary SMTP Gateway
Secondary SMTP Gateway Port
SMTP Timeout
5–30
Reply Address
Use SSL
Disabled
Negotiate
Required
SMTP Server Authentication
No authentication required
Login/Plain
CRAM‑MD5
Digest‑MD5
NTLM
Kerberos 5
Device‑Initiated E‑mail
None
Use Device SMTP Credentials
Device Userid
Device Password
To
Set the gateway information for an external print server.
Note: This menu is available only when the printer is attached to an external print
server through the USB port.
To
Specify SMTP server gateway and port information.
Note: 25 is the default SMTP gateway port.
Specify the amount of time in seconds before the server stops trying to
send an e‑mail.
Note: 30 seconds is the factory default setting.
Specify a reply address of up to 128 characters in the e-mail sent by the
printer.
Set the printer to use SSL for increased security when connecting to the
SMTP server.
Notes:
• Disabled is the factory default setting.
• When the Negotiate setting is used, the SMTP server determines if
SSL will be used.
Specify the type of user authentication required for printing privileges.
Note: "No authentication required" is the factory default setting.
Specify what credentials will be used when communicating to the SMTP
server. Some SMTP servers require credentials to send an e-mail.
Notes:
•
None is the factory default setting for Device‑Initiated E‑mail.
• Device Userid and Device Password are used to log in to the SMTP
server when Use Device SMTP Credentials is selected.
89