Horizontal Preview; Directional Stitches - Pfaff Creative Performance Owner's Manual

Horizontal preview (9)

To see your sequence horizontally, touch the
preview icon.
Your sequence will be shown on a pop-up. If it is
too long for the window, it is possible to zoom to all
(A) to see the entire sequence. You can also scroll
through the sequence with the arrows (B).
B
A
9

Directional stitches (17)

Add directional stitches between stitches in a
sequence. These stitches make it possible to move
stitches in various directions and you can create
new shapes and wider large-area borders.
Directional stitches are straight stitches with a
length of approximately 1mm and can be used in 16
different directions.
Open the directional stitches pop-up. The
selected angle will be indicated in green (C) in the
directional eld. The angle will also be shown on
the pop-up (D). Touch the directional eld to select
which angle you want to insert a stitch. You can
either touch the desired line on the white area or
touch and drag the green line and then release it at
the desired angle.
C
When the intended angle is selected, touch the
insert icon (E) and one stitch will be inserted in the
sequence at the cursor position.
E
The directional stitch can be deleted, duplicated or
mirrored without closing the directional stitches
D
pop-up.
5:5