LG G3L-PUEA User Manual page 74

CHAPTER 6 COMMUNICATION FUNCTION
Point
1) The I/O contact size of sending area and receiving area should be set as the
2) G4L-PUEA 1EA and GPL-TR2A(16points), GPL-D22A(16points), GPL-RY2A
3) It doesn't matter which one is set in advance between GMWIN program and
2) High speed link parameter setting in K300S(Station 0)
• Master module KGLWIN program
same as that of KGLWIN program and SyCon.
When selecting Smart I/O module in SyCon, the sending/receiving area size of
each module shall be set automatically. (available to verify in Slave Setting
window.)
(16points) are created in order and when setting the sending area as P004,
receiving area as M000,
* Sending area : P004
* Receiving area : M000
* Sending area size : 4 bytes(total output contact number)
* Receiving area size : 2 bytes(total input contact number)
* P004 data -> output to GPL-TR2A
* P005 data -> output to GPL-RY2A
* GPL-D22A input -> saved in M000.
SyCon.
6-59