CHAPTER 6 COMMUNICATION FUNCTION
• High speed link network type setting
• Sending/receiving parameter setting to K80S Station 1
• Master module 'high speed link1' setting completion screen
Select no.0 and
generate the parameter
modification window.
Link Enable setting,
Select base, slot, communication
type. ( select Pnet)
6-48
Receiving area is the area
receiving from slave(K80S) area
to master(K300S) and, designate
the sending area as the area to
send from master(K300S) to
slave(K80S).
When setting I/O size in
SyCon, set the same size
as high speed link setting.