LG G3L-PUEA User Manual page 38

CHAPTER 6 COMMUNICATION FUNCTION
The items of high speed link from the Figure means max. number of communication
module installation according to PLC CPU type. High speed link button of available
number of installation is actuated and in this case, high speed link no. is not related to the
installed slot no. and the slot no. should be set in the individual parameter setting screen
and it is available to set only one high speed link parameter for one communication
module.
The following Table shows the communication model available to install per MASTER-
K CPU type and max. number of installation.
Max. number of installation per MASTER-K CPU type
Available communication
Classification
K1000S CPU G3L-PUEA, G3L-PUEB
K300S CPU G4L-PUEA, G4L-PUEB
K80S, K120S
CPU
* If you use by combining the communication module using the high speed link, the
number of installation is limited.
● link : the item to allow the high speed link, the initial value is prohibited, and need
to set 'Enable' to execute the high speed link.
● self station no. : master module should be set in SyCon and slave module by rotary
switch. It is not available to modify here.
● Base : to set the base position where the communication module desired to set is
installed.
● Slot : to set the slot position where the communication module desired to set is
installed. (0 ~ 7 slot).
● Type : to set the type of the installed communication. Pnet should be set.
module
G7L-PBEA
6-23
Max. no. of installation
4EA
2EA/4EA (more than
Version 3.0)
1EA
Remarks