Table of Contents
Advertisement
Setting Your Home Port
By setting your home port, you can easily create a
route home using the Navigate to Home Port option
in the Find Menu. Be sure to mark your home port as
a waypoint before you "set" your home port. You can
set a home port for each vessel profile.
To set your home port:
1. Press MENU twice to open the Main Menu.
2. Highlight Vessel and press ENTER.
3. Highlight the Current Vessel field and press
ENTER.
4. Select the vessel for which you want to set the
home port and press ENTER.
5. Highlight the Home Port field and press
ENTER. Press ENTER again to open the Find
Menu. Find your home port using the Find
Menu. Refer to "Finding an Item" beginning on
page 16 for more information.
6. Highlight your Home Port in the search result
list and press ENTER.
7. From the information page, highlight Use and
press ENTER. Your Home Port is now set.
76CS Plus Owner's Manual
190-00507-00_0A.indd 45
N
S
L
AVIGATING IN THE
EA AND
AND
Navigating to Your Home Port
Once you have set you home port, you can
navigate to it by pressing a few buttons.
To navigate to your home port:
1. Press the NAV key.
2. Highlight Go To Point and press ENTER to
open the Find Menu.
3. Highlight Home Port and press ENTER.
The 76CS Plus generates a route to your home port.
If you do not have a home port set, the Vessel page
opens for you to set your home port.
NOTE: The Home Port feature is only available
in the sea modes: Powerboat and Sailboat. The
Home Port is not available in the Automotive
and Off Road modes.
M
>
N
S
ODES
AVIGATING IN THE
EA
2/14/2005 3:33:31 PM
M
ODES
45
Advertisement
Table of Contents
